ProTek RC Titanium Screw Kits B64D, B6 & B6D

The ProTek R/C Associated B6, B6D and B64D Titanium Screw Kits are an upgrade that include the screws needed to replace all the stock hardware.

Want to take performance to a higher level? Get closer to perfect with ProTek R/C Titanium Screws. Titanium delivers one of the highest strength-to-density ratios of any alloy. It is strong, much lighter than steel and is one of the best ways to quickly shed weight from your car. Plus, if you use ballast weights, titanium screws offer the advantage of eliminating chassis weight before having to equalize weight distribution.

ProTek R/C Titanium Screw Kits have been designed in-house by our leading technical experts and professional R/C drivers. Whereas some other brands use aluminum or low-grade Titanium, ProTek has searched for and found the best Titanium material for R/C applications. These kits are made to stringent standards to deliver the most comprehensive kit on the market. Don’t be fooled by cheaper, inferior kits that only include half of the screws you need.

To Maximize the life of ProTek R/C Titanium Screws:

  • Never use with a worn Allen hex tip.
  • Never use in areas where Loctite is to be used.
  • Never use in high stress areas, such as shock mounts or chassis braces.

ProTek RC 370TBL “Black Label” Waterproof High-Torque Brushless Crawler Servo

The ProTek 370TBL was developed specifically for crawler applications. Heavy 2.2 class rigs, U4 racers, lightweight 1.9 comp builds, and ultra detailed scalers can all benefit from the feature set that the 370TBL delivers. Pushing over 650 oz-in of stump-pulling torque and .13 speed at 7.4V, the 370TBL will move heavy 2.2 tires with ease – no matter how much weight you put in them.

All this power means nothing without durability. By combining this incredible power with a specialized gasket system, the 370TBL is waterproof up to 1-meter and will stand up to anything mother nature can throw at it. A full steel gear train, 25T output shaft and full aluminum machined heat sink case make the 370TBL extremely tough. The 370TBL delivers the excessive power that crawlers demand – with durability and reliability that make it a must have servo for crawlers that expect the most from their rigs.

** NOTE:

  • During testing, we found that some Tactic receivers included with the SCX10 II RTR do not communicate well with high performance servos, and may not function properly with this servo.
  • For best results, and the peak performance, we recommend you power this servo with a BEC.
  • Features:
  • Ideal for any 1.9 to 2.2 Crawler application
  • Waterproof up to 1 meter
  • 600 oz-in of torque @ 6.0V, and .135 transit speed
  • 650 oz-in of torque @ 7.4V, and .13 transit speed
  • Brushless motor
  • High voltage circuitry
  • Full steel gears
  • Full aluminum black anodized heat sink case
  • Dual ball bearings
  • 280mm servo lead
Servo Model
370TBL
Recommended Application 1/10 to 1/8 Scale Crawler
Operating Voltage 4.8V – 7.4V
Operating Temperature 14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V 0.135/60° sec
Operating Speed @ 7.4V
0.13/60° sec
Dynamic Torque @ 6.0V
600 oz-in (43.2 kg-cm)
Dynamic Torque @ 7.4V
650 oz-in (46.8 kg-cm)
Motor Type
Brushless
Output Shaft 25 Tooth
Gears Steel
Weight 72g
Pulse/Frequency
1520μs / 333hz
Dimensions 40x20x37.8mm
Length (Bottom to Mount)
28.4mm

ProTek RC Euro LS-5 .21 Long-Stroke, 5-Port Race Engine

The ProTek R/C Euro LS-5 is a 5-port long stroke .21 nitro engine perfect for 1/8 buggy, and great for 1/8 truck. It features a lightweight aluminum R7 conrod, 5 transfer ports, larger bore intake crankshaft, high efficiency large cooling head and a heat-resistant slide carburetor with standard venturi compatibility.

On the power end, the LS-5 produces smooth linear power to ensure fuel efficiency is maximized and your tires and dirt work as one. The LS-5 has another side to it though, producing explosive dirt-spraying bottom end torque, all at a triggers notice.

For a “budget friendly” engine, the LS-5 is the perfect option for all your racing and bashing needs. If you need quality, consistent results, and high performance – without breaking the bank – pick up the the ProTek R/C Euro LS-5.

Features:

  • Large efficient cooling head
  • Explosive bottom-end power
  • Smooth and linear power band
  • 5 Transfer port design
  • Long stroke
  • Steel bearings
  • Goes braaap!

Recommended Tuned Pipe Manifold: EFRA 9901 with 41021 Manifold

Specifications:
Displacement: 3.49cc.
Bore x Stroke: 16.26mm x 16.80mm
Transfer Ports: 5
RPM (Max Power): 34,000
RPM (Practical Range): 6,000 – 36,200
Rear Ball Bearing Type: 25.8mm Steel
Crankshaft Type: 14mm SG
Carburetor Type: 8mm Slide
Material: Plastic
Adjustment: Single
Glowplug Type: Turbo – C6T
Exhaust Position: Rear

Includes:

  • (1) Euro LS-5 Off-Road Engine
  • (1) C6TGC Turbo Glow Plug
  • (1) High Temp Exhaust Gasket
  • (1) Venturi Set (5.4, 6.0, 6.5 & 7.0mm)
  • (1) Instruction Sheet

ProTek RC “Prodigy 625 Duo Touch AC/DC Charger”

This is the ProTek R/C “Prodigy 625 DUO Touch AC” AC/DC Battery Charger. The next generation of Prodigy has arrived. The Prodigy Touch 625 DUO AC features an intuitive and easy-to-use touch screen interface with no physical buttons to wear out. Two independently-controlled 200 Watt internal power supplies provide a staggering 25 amps of charge current – per channel – making the Prodigy 625 DUO Touch AC an excellent choice for both surface and aircraft enthusiasts.

The 625 DUO Touch AC also provides important information during the charging process, including a data graph, internal resistance of the battery and individual cell voltage. Additional features include adjustable per-cell end voltage, worldwide voltage compatibility, automatic cell count recognition, and a Digital Power setting that allows you to power additional DC powered equipment when you aren’t charging a battery. These features only scratch the surface of what the Prodigy 625 DUO Touch AC delivers.

There’s a reason some of the most respected R/C professionals in the world use ProTek R/C. Pick up the Prodigy 625 DUO Touch AC today and see for yourself.

Hi-Voltage Capable
This charger features a Hi-Voltage LiHV mode that allows you to safely charge Hi-Voltage LiHV capable batteries. You can adjust the charging end voltage of this mode up to 4.40V per cell, which is considerably higher than 4.20V per cell of an ordinary LiPo battery. Charging at this higher end voltage requires a Hi-Voltage LiHV capable battery, but the power gains are significant to the overall punch and power for the R/C model. But please note: battery voltages exceeding 4.20V per cell is prohibited from sanctioned racing rules, such as ROAR, IFMAR, etc.

Prodigy 625 DUO Touch AC Features:

  • Dual Channel Touch Screen Digital AC/DC Balance Charger
  • Maximum 25A Charge Current, up to 200W Per Channel
  • Maximum 5A Discharge Current, up to 30W Per Channel
  • 100V – 240V AC Input
  • 11.0V – 18.0V DC Input Voltage Range
  • 5V/2.1A USB Port
  • Automatic Lithium Cell Count Recognition
  • LiPo, LiHV, Nickel & Lead Acid Compatible
  • Adjustable Charge End Voltage
  • Simple & Efficient User Interface
  • ±0.01 Balance Tolerance Range
  • Microprocessor Controlled
  • Multiple Safety Functions
  • Individual Cell Balancing
  • Heavy Duty Metal Case
  • Delta-Peak Sensitivity
  • Back-Light Screen
  • Efficient Heat Sink

Specifications:

AC Input Voltage: 110V or 240V
DC Input Voltage: 11.0V – 18.0V
Charge Power: 200W x2
Discharge Power: 30W x2
Charge Current: 0.1 – 25A x2
Discharge Current: 0.1 –  5.0A x2
Balance Current: 400mA/cell
LiPo/LiHV/LiFe Cell Count: 1-6S
NiMH/NiCd Cell Count: 1-16 cells
Pb Battery Voltage:  2-24V
Dimension: 197x240x67mm
Weight: 1725g

Includes:

  • (1) Prodigy 625 DUO Touch AC Charger
  • (1) DC Power Input Cable w/XT60 Connector
  • (2) XH Type LiPo Balance Board
  • (1) AC Power Input Cable
  • (2) Bullet to T-Plug Charge Lead
  • (1) Touch Screen Stylus Pen
  • (1) Alligator Clip Charge Lead
  • (2) Alligator Clips

NOTE: Included power cord is only compatible with Type B 110V outlets. “Type E/F” (PTK-5316), “Type G” (PTK-5317), and “Type I” (PTK-5318) power cords are available and must be purchased separately.

ProTek R/C iChecker 3.0 LCD Battery & Servo Checker

This is the ProTek R/C “iChecker 3.0” LCD Battery Checker. The “iChecker 3.0” provides you with an affordable way to monitor the condition of your batteries and allows you to easily see the total voltage, capacity, individual cell voltage, lowest & highest cell voltage, as well as the voltage difference between cells on 2S to 8S Lithium batteries with a simple tap of the buttons.

The “iChecker 3.0” is also great for monitoring the total voltage of Nickel chemistry batteries from 4 to 8 cells, testing servo operation, and testing ESC operation! With an “iChecker 3.0” in your toolbox, you’ll never have to question the condition of your batteries ever again.

Features:

  • Monitor total voltage, capacity, individual cell voltage, lowest & highest cell voltage, and voltage difference between Lithium cells
  • Monitor total voltage of NiCd or NiMH batteries
  • Lithium balance discharging
  • Servo tester
  • ESC tester
  • 2-8S LiPo, LiFe or Li-Ion batteries
  • 4-8-cell NiCd or NiMH batteries
  • 2.1″ LCD screen

NOTE: This unit is compatible with 2-8S JST-EH and JST-XH battery balance connectors. Batteries that use Thunder Power/Flight Power, or Polyquest type balance connectors will require a balance adapter board and cable.

ProTek R/C Turbo Glow Plugs

The ProTek R/C Turbo Glow Plugs  were developed to provide nitro enthusiasts with an affordable, general purpose turbo plug that provides a consistent tune. The T3, T4 and T5  provide a wide heat range for .12 to .21 size engines running 10 – 35% nitro content.

Shop for the ProTek R/C Turbo Glow Plugs at AMain Hobbies HERE

Heat Range Options:

  • PTK-2550: T3 Turbo Plug, “Ultra Hot” plug recommended for .12 to .21 size engines running 10 – 35% nitro in cold conditions.
  • PTK-2551: T4 Turbo Plug, general purpose “Hot” plug recommended for .12 to .21 size engines running 10 – 35% nitro.
  • PTK-2552: T5 Turbo Plug, “Medium” plug recommended for .12 to .21 size engines running 10 – 35% nitro in hot conditions.

ProTek RC 2S High Current Charge/Balance Adapters

Screen Shot 2016-08-29 at 10.39.27 AM

4mm to 4mm connectors

Screen Shot 2016-08-29 at 10.39.44 AM

4mm to 5mm connectors

Purchase the High Current Charge/Balance Adapters at AMain Hobbies HERE

The ProTek R/C 2S High Current Charge/Balance Adapter is the solution you have been waiting for if you charge/discharge your bullet batteries at higher than normal amp rates, or need a heavy duty low resistance charge cable. Featuring HUGE 10awg wire, gold plated bullets for the battery connection and bullet connectors for the charger connection, with an XH balance tap, this charge cable is one of a kind. The coiled jacket helps to keep the adapter flexible and tangle free and finishes off a package that will keep your work space clean and organized.

*Available as either 4mm to 4mm or 4mm to 5mm solid bullet connections. 

Features:

  • Fits chargers that use 4mm or 5mm bullet charging inputs
  • Hi-Amp gold plated 4mm or 5mm bullets for battery connection delivers higher amp carrying capacity
  • Hi-Amp gold plated 4mm  or 5mm bullets on charger side
  • 10awg wire to handle high current demands
  • Coiled jacket helps to prevent tangles

ProTek R/C Servo Lead & Terminal Crimping Tool

Screen Shot 2016-08-29 at 10.39.01 AM

Shop for the ProTek R/C Servo Lead & Terminal Crimping Tool at Amain Hobbies HERE

The ProTek RC Servo Lead & Terminal Crimping Tool is the tool you need to make custom length signal wires for your ESCs, receiver batteries and servos. This tool safely secures the connector pins on wire sizes between 14 and 28awg, without damaging the pin or the wire. Simply strip a short length of the shielding off the wires, install the connector pin into the tool, insert the wire into the pin, and squeeze the tool to crimp the pin in place.

Want more? Unlike most terminal crimping tools, the ProTek tool will allow you to strip 12, 16 and 22awg wire, and includes a cutter as well. Crimps 20, 24 and 28 AWG wire.

NOTE: When changing the length of your signal wires or receiver battery connectors, for the best results we recommend you use new connectors.

ProTek R/C Mugen 4-shoe Aluminum Clutch Shoes

Screen Shot 2016-08-18 at 11.03.26 AM

You can purchase the ProTek R/C Mugen 4-shoe clutch shoes HERE.

ProTek R/C offers Mugen 4-shoe kits in either 6061 Aluminum or 7075 shoes for the Mugen MBX and MGT vehicles equipped with the Mugen 4-shoe clutch (MUGE2709). ProTek R/C clutch shoes are designed to work with the Mugen 4-shoe flywheel to provide increased performance over the standard clutch shoe material. These shoes are precision machined from 6061 billet grade aluminum to provide a clutch shoe that is stable at high temperatures, offers consistent wear and increased clutch performance. ProTek R/C clutch shoes are an excellent option for high horsepower engines and harsh driving conditions, when the stock factory clutch shoes are not up to the task.
Mugen Style Clutch Shoe Weight: 1.2 Grams Each

Includes:

  • (4) Clutch Shoe
  • (4) Clutch Shoe Shim

ProTek R/C “Black Label” Brushless Servos

Screen Shot 2016-08-11 at 3.59.23 PM Screen Shot 2016-08-11 at 3.59.36 PM Screen Shot 2016-08-11 at 3.59.48 PM

Shop for the ProTek R/C “Black Label” Brushless Servos at AMain Performance Hobbies HERE 

Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior efficiency and lifespan of a brushless motor and you have a servo that hits all the marks, with the performance and quality required for a pro level build.

A black anodized aluminum case with aluminum and white accents give this servo a stealthy look that sets it apart from the rest. The aluminum upper case provides bomb proof durability and the heat sink center case offers efficient heat dissipation and helps to reduce weight. The lead wire is detachable, allowing you to easily custom tailor the servo lead to your application, and the package includes both 135mm and 285mm length servo leads. Plus, a full selection of servo arms and mounting hardware are included making installation easy.

ProTek R/C 170SBL 

Features:

  • Ideal for any 1/10 to 1/8 surface application that requires lightning fast response
  • Full aluminum black anodized case
  • High voltage circuitry
  • 0.09 transit speed, and 458 oz-in of torque @ 6.0V
  • 0.08 transit speed, and 535 oz-in of torque @ 7.4V
  • 135mm and 285mm length 22awg detachable servo leads included w/gold plated connectors
  • Full metal gears and dual ball bearings
  • Brushless motor
Servo Model
170SBL
Recommended Application 1/10 to 1/8 Scale Surface
Operating Voltage 4.8V – 7.4V
Operating Temperature 14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V 0.09/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Dynamic Torque @ 6.0V
458 oz-in (32.9 kg-cm)
Dynamic Torque @ 7.4V
535 oz-in (38.5 kg-cm)
Motor Type
Brushless
Output Shaft 25 Tooth
Gears Metal
Weight 72g
Pulse/Frequency
1520μs / 333hz

 

ProTek R/C 270SBL 

Features:

  • Developed for helicopter tail applications
  • Full aluminum black anodized case
  • High voltage circuitry
  • 0.055 transit speed, and 165 oz-in of torque @ 6.0V
  • 0.045 transit speed, and 205 oz-in of torque @ 7.4V
  • 135mm and 285mm length 22awg detachable servo leads included w/gold plated connectors
  • Full metal gears and dual ball bearings
  • Brushless motor
Servo Model
170SBL
Recommended Application Helicopter Tail
Operating Voltage 4.8V – 7.4V
Operating Temperature 14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V 0.055/60° sec
Operating Speed @ 7.4V
0.045/60° sec
Dynamic Torque @ 6.0V
165 oz-in (11.9 kg-cm)
Dynamic Torque @ 7.4V
205 oz-in (14.8 kg-cm)
Motor Type
Brushless
Output Shaft 25 Tooth
Gears Metal
Weight 72g
Pulse/Frequency
760μs / 800hz

 

ProTek R/C 270TBL 

Features:

  • Developed for helicopter cyclic
  • Full aluminum black anodized case
  • High voltage circuitry
  • 0.09 transit speed, and 395 oz-in of torque @ 6.0V
  • 0.08 transit speed, and 440 oz-in of torque @ 7.4V
  • 135mm and 285mm length 22awg detachable servo leads included w/gold plated connectors
  • Full metal gears and dual ball bearings
  • Brushless motor
Servo Model
170SBL
Recommended Application Helicopter Cyclic
Operating Voltage 4.8V – 7.4V
Operating Temperature 14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V 0.09/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Dynamic Torque @ 6.0V
395 oz-in (28.4 kg-cm)
Dynamic Torque @ 7.4V
440 oz-in (31.6 kg-cm)
Motor Type
Brushless
Output Shaft 25 Tooth
Gears Metal
Weight 72g
Pulse/Frequency
1520μs / 333hz